How to Change Your Starlink WiFi Password

To be put bluntly, to secure your devices, connection, and data while using Starlink WiFi, you need to practice better security. The best way to keep it up is by securing your WiFi with a stronger password. Here, you learn how to change Starlink WiFi password for better dish security.

Your Starlink dish delivers low-latency, high-speed internet from low-Earth orbit to your place, but that’s only half of it. Once that signal hits, your router broadcasts it as a Wi-Fi network. And just like any other wireless network, that broadcast can be picked up by neighbors or just about anyone passing by, within range, of course. 

TIP – If you can’t remember passwords or don’t know how to create a secure one, always consider using the best password manager. It not only generates top-grade passwords, but allows you to store them in a vault for future use. 

Starlink Wi-Fi is usually an open network by default. Whenever you do plug in a new Starlink system, there is no password at all. Anyone within about a hundred feet can hop onto your connection. This means that they can use your bandwidth and potentially access your connected devices. 

So, creating or changing a Starlink password isn’t just a good idea; it’s the most important requirement after you’ve set up.

For those who’ve already set a password but shared it with too many people, or would like to revoke access from some unwanted guests, we’ll show you how to change it.

But first, let’s dive into some requirements. 

Before Getting Started

• A phone or tablet with the Starlink mobile app installed. 
• Your device must be connected to your Starlink Wi-Fi network throughout the process. 

For those who lost the password they set entirely, skip down to the recovery section at the end of this guide.

How to Change Starlink Wi-Fi Password

Here’s how to get started: 

• Open the Starlink app on your device.
• Locate the “Settings” icon toward the bottom of the screen. Tap it.
• Find “Wi-Fi Configuration” from the list or simply “Network.” This depends on which app version you’re running. 
• Inside the “Wi-Fi Configuration” section, locate your current network name and the password field.
• In the password field, type in a new password. You can also try changing the network name. 
• Click on “Save.”

After these steps, the router immediately applies your new settings. Every device that is connected to your Wi-Fi will be removed from the network instantly. Now, you’ll be able to sign into the router with your new password via any device that was previously connected. You can also pick and choose who has access to it. 

How to Create a Strong Starlink Wi-Fi Password

Now that you know how to change Starlink Wi-Fi password, you must understand that not all are created equal. There are a few requirements to creating the best Starlink Wi-Fi password. 

 For instance, it needs to be at least eight characters long and no more than thirty-two. You can switch it up by using letters, caps, numbers, spaces, and symbols.

However, even if you follow these requirements, it doesn’t mean just about any 8-letter password is secure. For example, a password like “Starling2026” might meet the eight-character rule, but it is weak. The same goes for making passwords with your name or pet’s name in it. 

Here’s how to make it stronger: 

• Combine uppercase and lowercase letters.
• Throw in a couple of numbers or a symbol like “!@#$”.
• Ensure that it’s at least twelve characters long. For instance, something like “R1ver$ide%Coffee9!” is far harder to crack than “Starlink123.” But ensure that either you memorize it or the scrambled version makes sense to you. 

Can’t Remember Starlink Wi-Fi Password – Troubleshooting Guide

Two different passwords are involved with Starlink, and most people often mix them up. Your Wi-Fi password is the one you enter to join the network from your phone or laptop. Your Starlink account password is what you use to sign into the app and pay your bill. Changing one does not change the other.

So, if you’ve forgotten your Wi-Fi password and cannot connect any device to the network, you cannot use the app to change it. This is because the app needs a connection to communicate with the router.

 In this situation, there is just one reliable option: factory reset the router.

Factory Resetting Your Router

Here’s how to get started: 

Gen 2 Router (Cylindrical One)

• Unplug the router from power.
• Plug it back in.
• Unplug it again.
• Repeat this plug/unplug cycle six times total, each time waiting only two or three seconds between actions.
• After the sixth time, leave it plugged in. The router will reboot with factory settings.

For Gen 3 Router (Flat One)

• Look for the small reset button at the back of the router, under the cap covering the LAN ports.
• Use a paper clip or something similar to press that button briefly.
• The front light should then blink rapidly. When this happens, the router will restart.

Starlink Mini

• Find the reset button on the back.
• Press it firmly until you feel a click, then hold it for three seconds.
• The LED will blink quickly and then turn off.

Now, after trying any one of the reset methods, here’s what to do: 

• Wait a few minutes for the router to completely reboot.
• Open your device’s Wi-Fi settings and look for a network named “STARLINK.”
• Connect to it.
• Open the Starlink app.
• It will walk you through setting a new network name and password from scratch.

To Conclude

You now know how to change Starlink Wi-Fi password and a troubleshooting guide on factory resetting. Another thing, do not assume that your WiFi connection is safe just because you live in a secluded area. You’ll never know when cyberattacks take place; when you least expect it. It takes just two minutes to set a strong password.